Firmware

RGB (Most Common and Used with WS2812B, WS2812B-ECO, WS2813, and WS2815)

Raspberry Pi Pico 2 Firmware
Raspberry Pi Pico 2W Firmware
Seed RP2350 Firmware

RGBW (WS2814)

Raspberry Pi Pico 2 Firmware for RGBW LEDs
Raspberry Pi Pico 2W Firmware for RGBW LEDs
Seed RP2350 Firmware for RGBW LEDs

Copyright for LED Hook: Strip

If the Pico 2 device you have is not show, then please try the Raspberry Pi Pico 2 firmware, to see if it works first. If the Pico 2W device you have is not show, then please try the Raspberry Pi Pico 2W firmware, to see if it works first. If it doesn’t work, then please let me know what Pico 2 device you have, and I will compile for you.

If you have been using LED Hook: Strip already, then get the RGB firmware. That is the firmware that has been out for awhile now. The new RGBW firmware supports RGBW LEDs. This is were there are 4 LEDs. The 4th LED is a white LED, and reduces power by 2/3, when doing white.

Release Notes:

Bugs:

	LED Hook: Strip:

	Disaply Range Ordering Bug
		Display Range Had To be Sequential Ordering
		Used Strip 0 & 1
			Couldn't Use Strip 0 & 2
		There is Only 4 Display Range
			Unlike the 30 Structs for Other Commands
			Tied to the String
		Was Using Count, and Not String Number
		I only Used Display Range on Strip 0 & 1
			Reason Why I never Saw the Bug
		Fixed

	Thousands was Multiplying by 1100
		When Using Thousands Input
		Multiplied by 1100
			Not 1000
		Fixed

Enhancements:

	LED Hook: Strip:

	Added the Slash & Explosion Commands
		Slash for Recoil
		Explosion for Damage
		Both have Reverse and Double
		All Setting are Programmable
		Explosion has Wait, like Flash

	Recalulates When Switching Weapons
		When Old Value > New Value, and Old Value - New Value is 2 or More
		Keeps Track of the Values
			Added New Varible
			Because Flash Can Happen While Updating
		Switch Weapon that has Greater Difference

	Added 9 More Attrract Patterns
		Simple Attract Patterns