Firmware

RGB (Most Common and Used with WS2812B, WS2812B-ECO, WS2813, and WS2815)

Raspberry Pi Pico 2 Firmware
Raspberry Pi Pico 2W Firmware
Seed RP2350 Firmware

RGBW (WS2814)

Raspberry Pi Pico 2 Firmware for RGBW LEDs
Raspberry Pi Pico 2W Firmware for RGBW LEDs
Seed RP2350 Firmware for RGBW LEDs

Copyright for LED Hook: Strip

If you have been using LED Hook: Strip already, then get the RGB firmware. That is the firmware that has been out for awhile now. The new RGBW firmware supports RGBW LEDs. This is were there are 4 LEDs. The 4th LED is a white LED, and reduces power by 2/3, when doing white. If you don't know, get the RGB (top) one.

If the Pico 2 device you have is not show, then please try the Raspberry Pi Pico 2 firmware, to see if it works first. If the Pico 2W device you have is not show, then please try the Raspberry Pi Pico 2W firmware, to see if it works first. If it doesn’t work, then please let me know what Pico 2 device you have, and I will compile for you.

Release Notes:

Issues:

        People Using Scripts to Force Close HOTR
		If Forced, HOTR Cannot Shut Down Properly
		If LED Hook: Strip is Connected
			HOTR Might Have Time to Close it Down Properly
			Sinced Force, Not Always Happening
		Now if Serial Port is Disconnected
			It Does it's Shut Down Automatically
			If in a Game, then Exits Game
				Properly Clean UP of Memory
			Shuts Down Attract Patterns
		HOTR Should Never be Forced Closed, Unless you Have Too
		Along with the Emulator and DemulShooter
		Programs have a Process of Shutting Down
			If Forced Closed all the Time
			It Can Mess Things Up Over Time
				Reset Clears Things Out
		Don't Use '/F' in AHK

	Updated How the Attact Patterns are Cleared
		Seperated the Work Based on the Core, 0 or 1
		Makes Sure No Problem with Multi-Threaded

	Updated to Make Sure Strips are Cleared When Game Started
		Was Only Doing it if Attract Patterns were Running

Enhancements:

        Added Command to Reset into Boot Mode
		Brings up the USB Drive for Updating
		Makes Updating a lot Easier
		Can Click a Software Button, Instead of Unhooking the USB and Pressing BOOTSEL
			Don't Have to Open Cabinet to Get to Pico 2(W)
		After Talking to Peter about Reset Button, thaought I Should Do it for Boot