Firmware

RGB (Most Common and Used with WS2812B, WS2812B-ECO, WS2813, and WS2815)

Raspberry Pi Pico 2 Firmware
Raspberry Pi Pico 2W Firmware
Seed RP2350 Firmware

RGBW (WS2814)

Raspberry Pi Pico 2 Firmware for RGBW LEDs
Raspberry Pi Pico 2W Firmware for RGBW LEDs
Seed RP2350 Firmware for RGBW LEDs

Copyright for LED Hook: Strip

If the Pico 2 device you have is not show, then please try the Raspberry Pi Pico 2 firmware, to see if it works first. If the Pico 2W device you have is not show, then please try the Raspberry Pi Pico 2W firmware, to see if it works first. If it doesn’t work, then please let me know what Pico 2 device you have, and I will compile for you.

If you have been using LED Hook: Strip already, then get the RGB firmware. That is the firmware that has been out for awhile now. The new RGBW firmware supports RGBW LEDs. This is were there are 4 LEDs. The 4th LED is a white LED, and reduces power by 2/3, when doing white.

Release Notes:

	Updated the Display Range to Use Max Range Instead of Count
		Used to Build an Array off Max Count, when a Game Started
			Did All the Calculations at Started
		But Array was Static, and Didn't Change, if Max Ammo Change with Different Weapon
			Example, Max Count was Set to 100 with Main Weapon
				When Reload, Uses all LEDs with the 100 Ammo
				But Get Different Weapon that has Max Ammo of 50
				When Reload with New Weapon only Uses 50% of LED Strip
		Now You Can put the Max Range into Command
		When Reload Happens, if Max Count Changes
			It Redoes the Calculations
			Using 100% of the LED Strip
			Reload, is when the New Ammo Value is Bigger than Old Ammo Value
		Now Don't Need to Know All the Ammo & Life Values of All the Games
			Can Reuse the Commands for Games that have Ammo and Life Values
			Can Use Spreadshhets to Know What Games

	Added In Exit Command
		If In Game, it will Leave the Game Mode
		Turn Off all Attract Patterns
		Done in 1 Command
			Used to Take Multiple Commands

	For Pico 2W, Turned Off WiFi Chip
		Saved 1-3mA
		Turned WiFi Chip Enable Pin Off
			On Pico 2, Pin Not Connected

	Added In Full Support for RGBW
		Updated the Attrack Patterns
		Use Just RGB
		The 'SetColor' Function Calculates the W
			If R and G and B is > 0
				Find Minimum Value, which Equals W
				Then All Colors are Color = Color - W

	Updated Max Number of RGB LED Controllers to 9,999 in a Strip
		Was 999
		Funny Data in LHS Group File Info

	Updated Max Range on Display Range to 9,999
		Was 999

	Clear Out the Attract Pattern Data, When a Game Starts
		So that the Strips will be Synced at the Started